How Free Florida Shipping Works on a Fabrication Order
Freight can quietly change what a duct package really costs. When a fabricator quotes the metal and leaves delivery as a separate line, or as a question for later, the number you carry on the bid is not the number you end up paying. This article explains how shipping works on a DuctAxis fabrication order: where the duct ships from, what "free shipping anywhere in Florida" covers, how deliveries are scheduled, and what to put on the request so the delivery plan is right the first time.
For the full quote checklist (drawings, materials, connections, releases, pickup or delivery), see the Contractor Guide. For Florida service itself - what the shop builds for Florida contractors and how to request an estimate - see Florida Duct Fabrication. This post stays on shipping and delivery only.
DuctAxis is a commercial duct fabricator in Clewiston, Florida. We fabricate. We do not install.
The short answer
If the jobsite is in Florida, the order ships free. That applies anywhere in the state, not only near the shop. There is no Florida delivery charge to add to your bid and no freight line to chase after the quote comes back.
If the jobsite is outside Florida, do not assume free shipping. Delivery details for other states are confirmed with your project quote.
If shop pickup works better for your crew, you can pick up at the shop in Clewiston instead.
Where your duct ships from
DuctAxis has one shop, at 535 E El Paso Avenue, Suite C, Clewiston, FL 33440. Every order is fabricated there and ships from there. There is no second shop.
Clewiston sits on the south side of Lake Okeechobee, inland between the Gulf and Atlantic coasts. That puts the shop in the middle of South Florida rather than at one end of it. Free shipping is how the rest of the state is covered: a Florida jobsite far from Clewiston ships free, the same as one close by.
What "free shipping anywhere in Florida" covers
It covers
- Delivery of your fabricated order to a jobsite in Florida
- Every Florida order, not only large ones
- Any part of the state, including jobsites that are not named on our Florida page
It does not cover
- Jobsites outside Florida. Delivery for other states is confirmed with your quote.
- Installation. DuctAxis fabricates ductwork and ships it. Hanging, sealing, and connecting it in the field stays with your crew.
If anything about delivery is unusual on your job, put it on the request so it can be confirmed with the quote or the order instead of assumed.
How the duct leaves the shop
Ductwork leaves the shop fully assembled. Both ends are protected with blue wrap to help keep dust and dirt out on the way to the jobsite.
That matters when you plan the receiving end. The duct arrives as finished pieces, not as flat stock waiting to be formed in the field. Plan your staging space for assembled duct.
Delivery is scheduled around your job
A large package does not have to arrive all at once. Delivery can be scheduled by:
- Project
- Floor
- Zone
- System
- Release
If your crew is working one floor at a time, or the GC only has room for one system on site, say so on the request. Split the package the way you plan to install it, and the deliveries can follow the same split.
Delivery scheduling is confirmed with your order. Put the dates you need on the request, and the schedule is set when the order is placed.
What to put on the request so delivery goes right
The quote form and the Contractor Guide already ask for project details and dates. For shipping, these are the notes that prevent a call-back.
The jobsite
- The full jobsite address, not only the project name or the city
- The gate, entrance, or building where deliveries are received, if the site has more than one
- Any site rules that affect deliveries, such as receiving hours, a delivery gate, or a requirement to check in first
The people
- A site contact name and phone number for delivery day
- A second contact, if the person who sent the request will not be on site
The dates
- Your bid deadline, if you are still bidding
- Your required delivery date
- Whether you need expedited fabrication. Say so plainly rather than hoping a date in the notes gets noticed.
The split
- How the package should be released: all at once, or by floor, zone, system, or release
- Which marks or drawing sheets belong to each release
- Any release that must arrive before another one
Pickup instead of delivery
- If your crew will pick up at the shop in Clewiston, say so on the request
- If some releases ship and some are picked up, mark which is which
Florida jobsite vs. out-of-state jobsite
The most common shipping mix-up is an address problem: a Florida contractor bidding a job across the state line, or an out-of-state contractor bidding a Florida job.
What decides free shipping is where the jobsite is, not where your office is.
- Jobsite in Florida: the order ships free.
- Jobsite outside Florida: delivery details are confirmed with your project quote.
If a project has more than one site, list each address and which part of the package goes where. Do not let a Florida office address on the request stand in for the delivery address.
Shipping and the 48-hour quote
Quotes come back in under 48 hours, excluding weekends, after your plans are submitted. That is quote response time. It is not the fabrication lead time and it is not a delivery date.
Your delivery date is the date you put on the request, confirmed when the order is scheduled. If you need the duct sooner than the schedule would normally allow, ask about expedited fabrication on the request, not after the quote comes back.
Quick checklist before you send the request
If a box is empty, either fill it in or flag it in the request ("delivery gate not assigned yet, will confirm before release 1"). That is faster than a delivery note that looks complete and is not.
How this fits the Florida page
The Florida duct fabrication page is where Florida service lives: what the shop fabricates for Florida contractors, how quoting works, and how to request an estimate. This article does not replace that page; it only explains the shipping part in more detail so the delivery notes arrive complete.
When you are ready to price the package, use the Contractor Guide for project details, drawings, construction requirements, dates, and pickup or delivery notes.
Send your plans with the delivery notes
When the jobsite and delivery notes are ready, request a quote. Uploads accept PDF, XLSX, XLS, CSV or ZIP files: up to 8 files, 20 MB each, 50 MB total. For a larger package, call (863) 599-7014 or email office@ductaxis.com.
- Quote response time: under 48 hours, excluding weekends. That is how long it takes to get a quote back, not the fabrication lead time.
- Shipping: Free shipping anywhere in Florida. Delivery outside Florida is confirmed with your quote.
- Pickup: Shop pickup in Clewiston is available.
- Shop: 535 E El Paso Avenue, Suite C, Clewiston, FL 33440
Free estimates from your mechanical plans (PDF). Send what you have; a full jobsite address and clear delivery dates still make the first pass cleaner.
Delivery scheduling is confirmed with your order. This article is general guidance on shipping for fabrication orders and does not replace your project specifications, schedule, or the terms on your quote.
Request a quote